U.S.A. residents - Engine oil flexible maintenance interval
Use when the maintenance monitor for “Oil Change” is set to “Flexible”. For details, see maintenance monitor (Search).
|
Maintenance Interval |
Number of months or kilometers (miles), whichever comes first. |
||||||||
|---|---|---|---|---|---|---|---|---|---|
|
Months |
12 |
24 |
36 |
48 |
60 |
72 |
84 |
96 |
|
|
×1000 km |
16 |
32 |
48 |
64 |
80 |
96 |
112 |
128 |
|
|
×1000 miles |
10 |
20 |
30 |
40 |
50 |
60 |
70 |
80 |
|
|
ENGINE |
|||||||||
|
Drive belts |
I |
I |
|||||||
|
Engine oil & filter*1 |
Replace when wrench indicator light is ON. (Max interval:12 months/16,000 km (10,000 miles)) |
||||||||
|
COOLING SYSTEM |
|||||||||
|
Engine coolant*2 |
Replace at first 192,000 km (120,000 miles) or 10 years; after that, every 96,000 km (60,000 miles) or 5 years. |
||||||||
|
FUEL SYSTEM |
|||||||||
|
Air filter |
Replace when any equivalent timing of replacing engine oil. (Max interval:36 months/60,000 km (37,500 miles)) |
||||||||
|
Fuel lines and hoses*3 |
I |
I |
I |
I |
|||||
|
Hoses and tubes for emission*3 |
I |
I |
|||||||
|
IGNITION SYSTEM |
|||||||||
|
Spark plugs |
Replace every 120,000 km (75,000 miles). |
||||||||
|
CHASSIS and BODY |
|||||||||
|
Brake lines, hoses and connections |
I |
I |
I |
I |
|||||
|
Disc brakes |
I |
I |
I |
I |
I |
I |
I |
I |
|
|
Tire (Rotation)*4 |
Rotate every 8,000 km (5,000 miles). |
||||||||
|
Steering operation and linkages |
I |
I |
I |
I |
|||||
|
Front and rear suspension, ball joints and wheel bearing axial play |
I |
I |
I |
I |
|||||
|
Driveshaft dust boots |
I |
I |
I |
I |
|||||
|
Bolts and nuts on chassis and body |
T |
T |
T |
T |
|||||
|
Exhaust system and heat shields |
I |
I |
|||||||
|
AIR CONDITIONER SYSTEM |
|||||||||
|
Cabin air filter |
Replace when any equivalent timing of replacing engine oil. (Max interval:24 months/48,000 km (30,000 miles)) |
||||||||
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
T: Tighten
Remarks:
The engine oil and filter must be changed at least once a year or within 16,000 km (10,000 miles) since last engine oil and filter change. The system must be reset whenever replacing the engine oil regardless of the message/wrench indicator light display.
Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may cause serious damage to the engine and cooling system.
According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.
The Tire Pressure Monitoring System (TPMS) initialization must be performed so that the system operates normally (if equipped).
U.S.A. residents - Fixed maintenance interval
Use when the maintenance monitor for “Oil Change” is set to “Fixed”. For details, see maintenance monitor (Search).
|
Maintenance Interval |
Number of months or kilometers (miles), whichever comes first. |
||||||||
|---|---|---|---|---|---|---|---|---|---|
|
Months |
6 |
12 |
18 |
24 |
30 |
36 |
42 |
48 |
|
|
×1000 km |
12 |
24 |
36 |
48 |
60 |
72 |
84 |
96 |
|
|
×1000 miles |
7.5 |
15 |
22.5 |
30 |
37.5 |
45 |
52.5 |
60 |
|
|
SKYACTIV-G 2.5 |
|||||||||
|
Drive belts |
I |
||||||||
|
Engine oil & filter |
R |
R |
R |
R |
R |
R |
R |
R |
|
|
COOLING SYSTEM |
|||||||||
|
Engine coolant*1 |
Replace at first 192,000 km (120,000 miles) or 10 years; after that, every 96,000 km (60,000 miles) or 5 years. |
||||||||
|
FUEL SYSTEM |
|||||||||
|
Air filter |
R |
||||||||
|
Fuel lines and hoses*2 |
I |
I |
|||||||
|
Hoses and tubes for emission*2 |
I |
||||||||
|
IGNITION SYSTEM |
|||||||||
|
Spark plugs |
Replace every 120,000 km (75,000 miles). |
||||||||
|
CHASSIS and BODY |
|||||||||
|
Brake lines, hoses and connections |
I |
I |
|||||||
|
Disc brakes |
I |
I |
I |
I |
|||||
|
Tire (Rotation)*3 |
Rotate every 12,000 km (7,500 miles). |
||||||||
|
Steering operation and linkages |
I |
I |
|||||||
|
Front and rear suspension, ball joints and wheel bearing axial play |
I |
I |
|||||||
|
Driveshaft dust boots |
I |
I |
|||||||
|
Bolts and nuts on chassis and body |
T |
T |
|||||||
|
Exhaust system and heat shields |
Inspect every 72,000 km (45,000 miles) or 5 years. |
||||||||
|
AIR CONDITIONER SYSTEM |
|||||||||
|
Cabin air filter |
R |
R |
|||||||
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
L: Lubricate
T: Tighten
Remarks:
Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may cause serious damage to the engine and cooling system.
According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.
The Tire Pressure Monitoring System (TPMS) initialization must be performed so that the system operates normally (if equipped).