Front
Type A
Vanity mirror lights (Some Models)
Overhead lights/ Front map lights
Side turn signal lights (Some Models)
Front side-marker lights
Parking lights
Headlights (High/Low beam)/ Daytime running lights
Front turn signal lights
Type B
Vanity mirror lights (Some Models)
Overhead lights/ Front map lights
Side turn signal lights (Some Models)
Parking lights/Front side-marker lights
Headlights (High/Low beam)/ Daytime running lights
Front turn signal lights
Rear
4–Door
Trunk light
High-mount brake light
Overhead light (Rear)
Rear side-marker lights
Brake lights/Taillights (Some Models)
Rear turn signal lights
Brake lights/Taillights
Taillights (Some Models)
Reverse lights
License plate lights
5–Door
Luggage compartment light
High-mount brake light
Overhead light (Rear)
Rear side-marker lights
Rear turn signal lights
Brake lights/Taillights
Taillights (Some Models)
Reverse lights
License plate lights
When removing the lens or lamp unit using a flathead screwdriver, make sure that the flathead screwdriver does not contact the interior terminal. If the flathead screwdriver contacts the terminal, a short circuit may occur.
When replacing a bulb, contact an Authorized Mazda Dealer if necessary.
Use the protective cover and carton for the replacement bulb to dispose of the old bulb promptly and out of the reach of children.
For details regarding the installation positions of the interior lights, refer to the following:
Page top