Transmitter
Type A
Type B
-
(With theft-deterrent system)
The hazard warning lights flash when the theft-deterrent system is armed or turned off.
Refer to Theft-Deterrent System (Search).
-
(With the advanced keyless function)
A beep sound can be heard for confirmation when the doors are locked/unlocked using the key. If you prefer, the beep sound can be turned off.
The volume of the beep sound can also be changed.
Refer to Other Equipment/Functions (Search).
The operation indicator light flashes when the buttons are pressed.
Lock button
To lock the doors , press the lock button and the hazard warning lights will flash once.
(With the advanced keyless function)
A beep sound will be heard once.
To confirm that all doors have been locked, press the lock button again within 5 seconds. If they are closed and locked, the horn will sound.
Type A
Type B
-
The doors can be locked by pressing the lock button while any other door or the trunk lid is open. The hazard warning lights will not flash.
When the lock button is pressed while any door is open and then the door is closed, all the doors are locked.
-
Confirm that all doors are locked visually or audibly by use of the double click.
-
Make sure all doors are locked after pressing the button.
-
(With theft-deterrent system)
When the doors are locked by pressing the lock button on the key while the theft-deterrent system is armed, the hazard warning lights will flash once to indicate that the system is armed.
Unlock button
To unlock the driver's door, press the unlock button and the hazard warning lights will flash twice.
(With the advanced keyless function)
A beep sound will be heard twice.
To unlock all doors , press the unlock button again within 3 seconds and two more beep sounds will be heard.
Type A
Type B
-
The system can be set to unlock all doors by performing a single operation.
Refer to Other Equipment/Functions (Search).
-
(Auto re-lock function)
After unlocking with the key, all doors will automatically lock if any of the following operations are not performed within about 60 seconds. If your vehicle has a theft-deterrent system, the hazard warning lights will flash for confirmation.
The time required for the doors to lock automatically can be changed.
Refer to Other Equipment/Functions (Search).
-
A door or the trunk lid is opened.
-
The ignition is switched to any position other than off.
-
-
(With theft-deterrent system)
When the doors are unlocked by pressing the unlock button on the key while the theft-deterrent system is turned off, the hazard warning lights will flash twice to indicate that the system is turned off.
Trunk button
To open the trunk lid, press and hold the trunk button until the trunk lid opens.
Type A
Type B
Panic button
If you witness from a distance someone attempting to break into or damage your vehicle, press and hold the panic button to activate the vehicle's alarm. Call emergency services if necessary.
Type A
Type B
The panic button will work whether any door or the trunk lid is open or closed.
(Turning on the alarm)
Pressing the panic button for 1 second or longer will trigger the alarm for about 2 minutes and 30 seconds, and the following will occur:
-
The horn sounds intermittently.
-
The hazard warning lights flash.
(Turning off the alarm)
The alarm stops by pressing any button on the key.
Power saving function (Type B)
By turning on the transmitter power saving function, the advanced keyless entry*1 and push button start system functions turn off and the battery power consumption of the transmitter is restricted.
The remote control function is operational by operating the transmitter switch even while the power saving function is turned on. However, the operation indicator light of the transmitter does not turn on/flash.
Turning on the power saving function
After you have turned on the power saving function according to the following procedure, the hazard warning lights and sound operate*1 one time.
-
Press the lock button on the transmitter 4 times within 3 seconds to turn on the operation indicator light.
-
Press the lock button continuously for 1.5 seconds or longer while the operation indicator light turns on (for 5 seconds).
-
Press any of the buttons on the transmitter to make sure that the operation indicator light does not turn on/flash.
Turning off the power saving function
After you have turned off the power saving function according to the following procedure, the hazard warning lights and sound operate*1 one time.
-
Press any of the buttons on the transmitter to make sure that the operation indicator light does not turn on/flash.
-
Press the lock button on the transmitter 4 times within 3 seconds to turn on the operation indicator light.
-
Press the lock button continuously for 1.5 seconds or longer while the operation indicator light turns on (for 5 seconds).
-
With the advanced keyless function
