Convenient Ways to Use the Power Liftgate
The liftgate fully-open position can be changed according to the height of a garage.
Set the desired fully-open position of the liftgate at the position where it is open more than halfway. The liftgate fully-open position cannot be changed to a position that is less than half open.
Changing the fully-open position
-
Stop the liftgate at the desired position.
-
Press and hold the power liftgate close switch for 3 seconds or longer.
A warning sound is activated 2 times to indicate that the position change has been completed.
Resetting the set fully-open position
-
Open the liftgate.
-
Press and hold the power liftgate close switch for 7 seconds or longer.
A warning sound is activated 3 times to indicate that the reset has been completed.
After 3 seconds have passed since the switch was pressed, a warning sound is activated 2 times to indicate that the liftgate fully-open position has changed. Continuously press the switch for 7 seconds to complete the reset.
