Power Windows
The power window has two functions.
Auto-opening/Closing Function
The windows can be fully opened and closed without having to continue operating the power window switch.
Jam-Safe Function
If a foreign object is detected between the window and the window frame while the window is closing, the window stops closing and opens slightly.
-
The power windows cannot be opened from the outside of the vehicle if the power window initialization has not been completed.
Refer to Initializing the Power Window (Search).
-
(A window cannot be closed)
If the jam-safe function has operated and the window cannot be closed, check around the window frame for a foreign object.
If there is no foreign object around the window frame, forcibly close a window using the following procedure.
-
After switching the vehicle power OFF, wait for 45 seconds or longer.
-
Switch the vehicle power ON.
-
Operate the switch in the direction to close the window until the jam-safe function operates and the window stops. Repeat this operation a total of 5 times.
-
Continue pulling up the switch to fully close the window.
-
