Convenient Ways to Use the Doors
Proximity Type Auto Lock Function (With the Advanced Keyless Function)
You can set the vehicle to lock automatically when you leave the detection area of the touch sensor.
Set using “Settings” on the Mazda Connect home screen or consult an Authorized Mazda Dealer.
A sound is activated one time when closing all the doors and the liftgate while the key is being carried.
If you proceed to leave the operation range, the vehicle is locked automatically (it is locked automatically after about 30 seconds even if you do not leave the operation range).
However, they are not locked under the following conditions.
-
Another key is left inside the vehicle.
-
The driver’s door is already locked.
-
You are out of the operational range before the doors and the liftgate are completely closed.
Auto re-lock function
The vehicle is locked automatically by the auto re-lock function if you do not perform any of the following operations within about 60 seconds after touching the detection area of the touch sensor or unlocking with the key.
-
Open any door or liftgate.
-
Switch the vehicle power to a position other than OFF.
The time required until automatic locking occurs can be changed.
Set using “Settings” on the Mazda Connect home screen or consult an Authorized Mazda Dealer.
