How to Use the Lane-keep Assist System (LAS)

When the LAS operates

The LAS operates to assist the steering wheel operation when all the following conditions are met and the system detects that your vehicle may be deviating from its lane.

  • The vehicle speed is about 64 km/h (40 mph) or faster.

  • The system detects white (yellow) lane lines.

  • The CTS steering assist function is not operating.

While the steering wheel operation assist is operating, the screen display notifies the driver.

Instrument cluster

Active driving display

 

  • The LAS operates only on the side that detects white lines (yellow lines).

  • The LAS may not operate normally if any of the following conditions is met.

    • The forward sensing camera (FSC) cannot detect target objects.

      Refer to Forward Sensing Camera (FSC) (Search).

    • The visibility of white (yellow) lane lines is poor.

Close Note
View Note

LAS temporary cancellation

If any of the following conditions is met, the LAS is temporarily canceled. The LAS operation is automatically restored when the system's operation conditions are met.

  • The turn signal lever is operated.

  • The steering wheel is operated abruptly.

  • The accelerator pedal is depressed abruptly.

  • The brake pedal is depressed.

  • The TCS/DSC is operating.

  • The TCS/DSC is turned off.

  • The Off-Road Traction Assist is on.

Turning off the LAS

The LAS can be turned off using the Mazda Connect.

Set using “Settings” on the Mazda Connect home screen or consult an Authorized Mazda Dealer.

 

When the LAS is turned off, the LAS & LDWS OFF indicator turns on.

Page top