Wrench Indicator Light
When the ignition is switched ON, the wrench indicator light turns on and then turns off after a few seconds.
The wrench indicator light turns on under the following conditions:
-
When the preset maintenance period has arrived.
-
When it’s time to replace the engine oil.
-
The wrench indicator light turns on earlier than the preset period depending on vehicle usage conditions.
-
Whenever the engine oil is replaced, a reset of the vehicle engine control unit is necessary.
Select “Information” → “Vehicle Status Monitor” on the Mazda Connect home screen, and then check the maintenance period , or consult an Authorized Mazda Dealer.
