Message Indicated on Multi-information Display (Some Models)
If there is a notification from the vehicle, a message is displayed in the multi-information display. Check the information and take the necessary action.
If the warning light turns on/flashes simultaneously or a symbol is indicated in the display, check the information regarding the warning light or symbol.
Refer to If a Warning Light Turns On or Flashes (Search).
|
Display |
Content |
Action to be taken |
|---|---|---|
 |
Indicated when the push button start is pressed while the selector lever is not in the P position. |
Shift the selector lever to the P position. |
 |
Indicated when the push button start is pressed without depressing the brake pedal. |
Depress the brake pedal and press the push button start. |
 |
Indicates when the Electric Parking Brake (EPB) switch is operated without depressing the brake pedal. |
Operate the Electric Parking Brake (EPB) switch while depressing the brake pedal. |
 |
Indicates when there is a problem with the brake related system while the vehicle is being held in a stop position by the AUTOHOLD function or during the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) stop hold control. |
Depress the brake pedal. Cancel the AUTOHOLD function or the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function), and have your vehicle inspected at an Authorized Mazda Dealer. |
 |
Indicates the possibility of the vehicle not being held in the stopped position by the AUTOHOLD function or the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) stop hold control, such as on steep slopes. |
Depress and hold your foot on the brake pedal. |
 |
Indicates when the cancel operation is done without depressing the brake pedal while the vehicle is being held in the stopped position by the AUTOHOLD function. |
Cancel the AUTOHOLD function stop hold control while depressing the brake pedal. |
 |
Indicated when the engine coolant temperature is high or the engine is hot, and the engine output is limited. |
Drive slowly and make sure that the indication turns off. If the indication does not turn off, consult an Authorized Mazda Dealer. |
 |
This message is indicated when the Mi-Drive switch is operated while there is a problem with the Mazda intelligent Drive Select (Mi-Drive) related system. |
Have your vehicle inspected by an Authorized Mazda Dealer. |
 |
This message is indicated when SPORT mode is selected while Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function), and Traffic Jam Assist (TJA) are operating. |
When Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function), and Traffic Jam Assist (TJA) are operating, the vehicle cannot be driven in SPORT mode. |
 |
This message is indicated when there is a problem with the related system during Mi-Drive operation. |
Have your vehicle inspected by an Authorized Mazda Dealer. |
 |
This message is indicated when Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function), and Traffic Jam Assist (TJA) are turned on while the vehicle is being driven in SPORT mode. |
When Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function), and Traffic Jam Assist (TJA) are operating, the vehicle cannot be driven in SPORT mode. |
 |
This message is indicated when the Mi-Drive switch operation is not accepted during operation of equipment such as the ABS. |
Operate the Mi-Drive switch during steady driving. |
 |
This message is indicated when Mi-Drive is stopped by an operation other than by the driver. |
If this message is indicated even though the Mi-Drive switch is operated again, have your vehicle inspected by an Authorized Mazda Dealer. |
