How to Use the Driving Position Memory

A driving position can be programmed to the position memory switch and the key.

Programming

  1. Switch the vehicle power ON.

  2. Adjust the following driving positions to the desired positions.

    • Driver's seat

    • Active driving display

    • Outside mirrors

    • Steering wheel (Power type)

  3. Continue pressing the SET switch until a sound is activated.

  4. Do the following operation within 5 seconds after the sound is activated to program the driving position.

    • Programming to a position memory button

      Press the button you want to program, either 1 or 2 button.

    • Programming to the transmitter

      Press the unlock button on the transmitter.

    A sound is activated when the operation is completed correctly.

Adjusting to the Programmed Driving Position

Operation Using the Position Memory Switch

Press either switch 1 or 2 that you programmed to activate the seat adjustment to your position.

A sound is activated when the adjustment to the programmed driving position is completed.

Operation Using the Key

  1. Unlock the driver's door using one of the following methods.

    • Touch the sensing area of the door release touch sensor.

    • Press the key unlock button.

  2. If the driver's door is opened within a certain period of time after unlocking, adjustment of the next driving position starts.

    • Driver's seat

    • Active driving display

    • Outside mirrors

    • Steering wheel (Power type)

    A sound is activated when the adjustment to the programmed driving position is completed.

Deleting a Programmed Position

Erasing the Position Stored in the Position Memory Switch

Program a new driving position.

Deleting a Position Programmed to the Key

  1. Switch the vehicle power OFF.

  2. Continue pressing the SET switch until a sound is activated.

  3. Press the key lock button within 5 seconds after the sound is activated.

 

  • If the angle of the outer mirror is adjusted close to the limits of its range of motion, the angle of the outer mirrors may not be programmed correctly.

  • When the adjustment to the programmed driving position has been completed, a sound is not activated.

  • Under the following conditions, the driving position adjustment is canceled.

    • The seat adjustment switch/SET switch/steering wheel (power type)/outer mirrors/active driving display for the driver's seat is operated to adjust the position.

    • The key lock button or unlock button is operated.

    • The vehicle moves.

    • The selector lever is shifted to a position other than P.

    • When the seat operates, a load of a certain amount or more is detected and the safety function operates.

Close Note
View Note

Page top