How to Use the AC Power Outlet (120 V/1,500 W)
Before using the electrical appliance, always follow the precautions indicated in the instruction manual for the electrical appliance to be used.
Connecting
-
Press the power switch 2 times without depressing the brake pedal.
The indicator light flashes and turns on when it is ready to be used.
If the indicator light turns off after flashing, charge the vehicle. If you press the AC power switch again after charging the vehicle and the indicator light turns off after flashing, there may be a problem with the system. Contact an Authorized Mazda Dealer.
Open the lid and connect the electrical appliance to be used.
Disconnecting
Press the switch again to turn off the indicator light. Then disconnect the electrical appliance.
-
Some electrical appliances may not operate even if their electrical capacity is 1,500 W or lower.
-
The protection function may operate and the AC power outlet may be unusable if the high voltage battery level is low or the cabin temperature is extremely high or extremely low. In addition, some electrical appliances may not operate normally.
-
If the AC power switch is switched on while using the radio, noise may occur from the speakers. In addition, depending on the electrical appliance being used, the noise may become even louder after connection.
-
Do not use the AC power outlet with an adapter connected. In addition, do not use a branch outlet to use more than one electrical appliance.
-
When closing the windows, doors or the liftgate, be careful not to pinch a power cord.
-
The factory setting for the power supply frequency of the vehicle is 60 Hz. To switch the power supply frequency of your vehicle, consult an Authorized Mazda Dealer.
