Operation Using Touch Sensor
A warning beep is activated to notify the driver that the doors are not locked when all of the following conditions are met:
The vehicle power is switched OFF.
All the doors are not fully closed.
The lock is operated 3 times within 5 seconds.
Check the vehicle power and whether the doors are open or closed, and then operate the lock again.
Operation Using Door-lock Switch on the Liftgate
When the door-lock switch on the liftgate is pressed under any of the following conditions, a warning sound is activated.
The vehicle power is switched to a position other than OFF.
Any door is open.
Make sure that none of the above conditions are present, and then press the door-lock switch again.
Page top