Tool Storage

Jack (Some Models)

To remove the jack

  1. Remove the cover.

     

  2. Turn the wing bolt and jack screw counterclockwise.

    1. Wing bolt

    2. Jack screw

     

To secure the jack

  1. Insert the wing bolt into the jack with the jack screw pointing back and turn the wing bolt clockwise to temporarily tighten it.

  2. Turn the jack screw clockwise.

    1. Wing bolt

    2. Jack screw

     

  3. Turn the wing bolt completely to secure the jack.

  4. Insert the cover tabs and install the cover.

 

Maintenance

  • Always keep the jack clean.

  • Make sure the moving parts are kept free from dirt or rust.

  • Make sure the screw thread is adequately lubricated.

Page top