How to Use the Driving Position Memory

A driving position can be programmed to the position memory switch and the key.

Perform the operation on the driving position setting screen.

Opening the Driving Position Memory Setting Screen

  1. Switch the vehicle power ON.

  2. Tap on the navigation bar of the Mazda Connect home screen.

  3. Tap “Driving Position”

    The settings screen opens.

Programming

  1. Adjust the following driving positions to the desired positions.

    • Driver's seat

    • Active driving display

    • Outside mirrors

  2. Tap the for either “Driving Position 1” or “Driving Position 2” that you want to store.

    Perform the operation following the instructions on the Mazda Connect screen.

When you re-register

  1. Tap the for either “Driving Position 1” or “Driving Position 2” that you want to store.

    Perform the operation following the instructions on the Mazda Connect screen.

 

(With Driver Personalization System)

You can also register using the Ideal Driving Position Assist.

Refer to How to Use the Driver Personalization System (Search).

Close Note
View Note

Calling up the Programmed Driving Position

  1. Open the driving position memory setting screen.

  2. Tap the position for either “Driving Position 1” or “Driving Position 2” that you want to call up.

    When the adjustment to the programmed driving position is completed, a sound is activated and a message is displayed.

 

If you do not perform the operation correctly, a sound indicating that the programming has failed is activated.

 

If the angle of the outer mirrors only changes a little, the angle of the outer mirrors may not have been programmed correctly.

 

If the angle of the outer mirror is adjusted close to the limits of its range of motion, the angle of the outer mirrors may not be programmed correctly.

 

When the adjustment to the programmed driving position has been completed, a sound is not activated.

Close Note
View Note

Deleting a Programmed Position

  1. Tap the for either “Driving Position 1” or “Driving Position 2” that you want to erase.

    Perform the operation following the instructions on the Mazda Connect screen.

Linking to the key

  1. Tap the for “Key-Linked Driving Position”.

  2. Tap “Add Key” (If another key has already been registered).

  3. Tap “Link”.

  4. Press the unlock button on the key within 5 seconds.

    When registration is completed, a sound is activated and a message is displayed.

Calling up the Programmed Driving Position

  1. Unlock the driver's door using one of the following methods.

    • Touch the sensing area of the door release touch sensor.

    • Press the key unlock button.

  2. If the driver's door is opened within a certain period of time after unlocking, adjustment of the next driving position starts.

    • Driver's seat

    • Active driving display

    • Outside mirrors

    A sound is activated when the adjustment to the programmed driving position is completed.

Canceling key linkage

  1. Tap the for “Key-Linked Driving Position”.

  2. Tap “Unlink Key”.

  3. Press the key lock button within 5 seconds.

    A message is displayed to notify the user that the key has been unlinked.

Page top