How to Use the e-SKYACTIV PHEV
Switching the Drive Mode
You can switch the drive mode of the hybrid system by operating the switch.
TOWING mode (Some Models)/SPORT mode/NORMAL mode/EV mode (Some Models)/ECO mode (Some Models)/OFF-ROAD mode
Refer to How to Use the Mazda intelligent Drive Select (Mi-Drive) on page Reference (Search).
CHARGE Mode
The engine is used as a generator, and the vehicle is driven while charging the high voltage battery.
-
Start the hybrid system.
-
When CHARGE mode is activated, the CHARGE mode indicator light 
in the instrument cluster turns on.
Power is generated to the preset target charge amount, and when the target charge amount is reached, power is generated to maintain it.
Switching to CHARGE mode may not be possible depending on the conditions of the hybrid system.
When power consumption is high due to the vehicle driving conditions, outside air temperature, or when the air conditioner is used, charging may take longer than usual or may not occur.
When the vehicle is driven while in CHARGE mode, the engine operates to generate electricity, therefore fuel consumption may increase compared to when driving the vehicle in a mode other than CHARGE mode.
If the vehicle power is switched OFF while switching the mode to CHARGE mode, the CHARGE mode will be canceled the next time the vehicle power is switched ON.
When pressing the charge mode switch while the Mazda intelligent Drive Select (Mi-Drive) is in EV mode, the Mi-Drive switches to NORMAL mode and the vehicle is driven in CHARGE mode. (Some Models)
The mode may not be able to switch to CHARGE mode when the fuel is low.
The target charge amount can be changed.
Set using “Settings” on the Mazda Connect home screen or consult an Authorized Mazda Dealer.
Power Meter
Displays in the instrument cluster while driving in NORMAL mode or EV mode (Some Models)/ECO mode (Some Models).
ECO mode (Some Models)/NORMAL mode
1 POWER gauge
2 CHARGE gauge
3 EV drive indicator light
4 Boost indicator light
5 CHARGE mode indicator light
EV mode (Some Models)
1 POWER gauge
2 CHARGE gauge
3 Boost indicator light
POWER gauge
Displays the energy used by the motor or engine for driving. The higher the output, the more the power meter needle moves to the right. The more the power meter needle moves to the right, the more likely it is that the engine will start.
CHARGE gauge
Displays the energy charged in the high voltage battery by regenerative braking. The higher the charge, the more the power meter needle moves downward.
Boost indicator light
The light turns on when the energy used for driving is at maximum output.
EV drive indicator light
The light turns on when the vehicle is being driven using only the motor.
CHARGE mode indicator light
The light turns on when the vehicle is being driven in CHARGE mode.
Approaching Vehicle Audible System
A warning sound is automatically activated to warn that the vehicle is approaching.
If any of the following conditions is met while the vehicle is driven, the approaching vehicle audible system operates.
-
The selector lever is in the R position.
-
The vehicle speed is 41 km/h (25 mph) or slower.
