Charge System
|
Item |
Servicing data |
|---|---|
|
Input power |
110 - 240 V AC |
|
Rated frequency |
60 Hz |
|
Maximum rated electrical current |
In normal charge 32A AC |
|
Maximum power consumption |
7.2 kVA (normal charge) |
|
EV charge mode/Connection type |
Normal charge: Mode 2, Mode 3/TYPE1 |
|
Installation requirements (information on protection against short-circuit current and equipment protection) |
Applicable laws and regulations, and standards must be followed for protection measures against over-current and over-voltage. Always make sure to install appropriate over-current protection devices to the wiring of houses and buildings. |
|
IP level |
IP44: When charge connector is connected to charge inlet IP67: Charging Cable |
|
Operating temperature |
On Board Charger Ambient temperature: －30°C (－22°F) to 85°C (185°F) Coolant temperature: －30°C (－22°F) to 70°C (158°F) Charging Cable Ambient temperature: －30°C (－22°F) to 55°C (131°F) |
|
Storage temperature |
On Board Charger Ambient temperature: －40°C (－40°F) to 85°C (185°F) Coolant temperature: －40°C (－40°F) to 85°C (185°F) Charging Cable Ambient temperature: －40°C (－40°F) to 80°C (176°F) |
|
Applicable standards |
On Board Charger EN/IEC 61851-1, EN/IEC 61851-21, UL 2202 Charging Cable NFPA 70, NFPA 79, SAE-J 1772, UL 817, UL 2231-1, UL 2231-2, UL 2251, UL2263, UL 2594, CSA C22.2 No. 280-16 |
|
Adapters |
Do not use an adapter with the plug and connector of the charging cable. Do not use an extension cable. |
