How to Use the M Hybrid Boost

M Hybrid Boost automatically switches between engine assist by the motor and charging by regenerative braking according to the driving conditions of the vehicle. The M Hybrid Boost power generating status is displayed on the system operation status display of the fuel economy monitor.

Select “Information” → “Fuel Efficiency Monitor” → “Energy Flow Monitor” on the Mazda Connect home screen, and then check M Hybrid Boost operation status, or consult an Authorized Mazda Dealer.

 

Drive the vehicle for about 30 minutes once every 2 to 3 months because self-discharge occurs gradually if the vehicle is not driven for a long period of time. If the M Hybrid Boost Battery discharges completely and the M Hybrid Boost system cannot be activated, contact an Authorized Mazda Dealer.

Close Note
View Note

Approaching Vehicle Audible System

A warning sound is automatically activated to warn that the vehicle is approaching.

If any of the following conditions is met while the vehicle is driven, the approaching vehicle audible system operates.

  • The selector lever is in the R position.

  • The vehicle speed is 41 km/h (25 mph) or slower.

Replacement and Disposal of M Hybrid Boost Battery

Technical knowledge and skill are necessary in handling the M Hybrid Boost Battery. The M Hybrid Boost Battery is collected and recycled to prevent accidents involving it. When scrapping your vehicle, replacing the M Hybrid Boost Battery, or disposing of the M Hybrid Boost Battery, consult an Authorized Mazda Dealer. Please cooperate in ensuring that the vehicle's M Hybrid Boost Battery is collected and recycled.

M Hybrid Boost Malfunction

If the vehicle receives an impact of a certain level or greater in a collision, the M Hybrid Boost system stops. In this case, the charging system warning light turns on and the M Hybrid Boost system may not activate. Park the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.

Page top